Whirlpool Washing Machine Parts

Washing machine drain pump. *Coin trap only available with pump assembly. If the washer does not drain the pump could be locked up or a small object may be clogging it. Also a small leak in front of the washer could be caused by a defective pump.

OEM Part - Manufacturer #WPW10730972

If your washer smells we recommend cleaning it with Affresh once a month.

Adjustable leveling leg for washing machine. This leveling leg has a rubber foot. If the leveling leg is not adjusted properly, the washer will be off-balance and will vibrate or shake during operation.

OEM Part - Manufacturer #WPW10001130

Washing machine rubber door boot seal. Creates seal between front of washing machine and tub that holds the water. If the washer is leaking, the door boot may have a tear in it. Overloading the washer is the most common cause for a torn door boot.

OEM Part - Manufacturer #WPW10111435

Door strike attached to inner door panel

OEM Part - Manufacturer #WP8540221

Hose clamp

OEM Part - Manufacturer #WP596669

Spray Paint - White

OEM Part - Manufacturer #350930

Door lock latch

OEM Part - Manufacturer #WPW10253483

Washer drain hose extension kit. Used to extend washing machine drain hose approximately 4 feet. *Also, order the required adapter to connect the extension to the existing drain hose.

OEM Part - Manufacturer #285863

Washing machine inner tub drive belt

OEM Part - Manufacturer #WP8540101

Washing machine water inlet valve assembly. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the washer may fill slowly or not fill at all.

OEM Part - Manufacturer #WP8540751

Boot seal front clamp ring

OEM Part - Manufacturer #W11032829

Screw, 8-18 x 3/8

OEM Part - Manufacturer #WP488729

5 Foot fill hose for hot or cold water

OEM Part - Manufacturer #WP89503

Over time, rubber hoses dry out and become susceptible to leaks or bursts. Replace fill hoses every 5 years to reduce the risk of hose failure.