Whirlpool 3RLSQ8033SW1 Washing Machine Replacement Parts

Suspension Spring

Washing machine drain pump. The pump mounts directly to the motor with two clips. If the washer does not drain then the pump could be locked up or a small object may be clogging it. A small leak in front of the washer could be caused by a defective pump.

Consider replacing the motor coupling while you have the washing machines cabinet off.

Whirlpool's transmission is a genuine replacement part for washing machines that ensures optimal turning motion for the drum, resulting in the best wash possible for clothes.

The drive coupler can wear out significantly over time. Consider replacing the drive coupler while you have the washer apart.

Washing machine tub counterbalance spring. This spring offsets the weight of the motor on the front of the washer. If broke, the tub will lean forward and the tub will be off balance during the spin cycle.

White Touch Up Paint

Replacement agitator kit

Washing machine agitator repair kit with a short length cam (there are other kits available for different models). This kit should be used when the top part of the agitator is not moving properly but the bottom part is.

If the bolt is stripped, it should be replaced.

Washing machine main tub seal

If this seal fails water will leak out from the underside of the plastic outer tub.

Spring clip inside control knob

Snubber friction pads at the tri-base

Agitator base

Drive block under inner tub

Agitator Thrust Washer