Whirlpool Washing Machine Parts

Water inlet valve and inlet assembly with thermistor for water temp sensing. The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all.

White washer lid strike assembly. The strike is what the lid lock hooks onto to lock the washing machine lid. If old strike looks different the latch may need to be replaced as well.

Tub suspension rod set (4)

Replacement agitator kit

Washing machine door boot. If the washer is leaking, the door boot may have a tear in it. Overloading the washer is the most common cause for a torn door boot.

Check out the Related Items for boot seal clamps and a good washing machine cleaner.

Washing machine main tub seal

If this seal fails water will leak out from the underside of the plastic outer tub.

Door seal

Washplate hold down bolt

Spring clip inside control knob

Door Hinge

Washing machine lid switch assembly with wire harness. The lid switch ensures that the washer door is closed while the washer is spinning. If the lid switch is broken, the washer will not spin. If the washer won't spin but will still agitate, the lid switch is likely defective.

If your washing machine has a moldy or musty odor, we recommend cleaning it with Affresh washing machine cleaner.

Shock absorber. This shock absorber prevents the washer from vibrating by absorbing the movements of the washer tub.

Adjustable leveling leg for washing machine. This leveling leg has a rubber foot. If the leveling leg is not adjusted properly, the washer will be off-balance and will vibrate or shake during operation.