Whirlpool Washer/Dryer Combo Parts

Washing machine tub counterbalance spring. This spring offsets the weight of the motor on the front of the washer. If broke, the tub will lean forward and the tub will be off balance during the spin cycle.

OEM Part - Manufacturer #WPW10250667

Washing machine main tub seal

OEM Part - Manufacturer #W10814296

If this seal fails water will leak out from the underside of the plastic outer tub.

Screw

OEM Part - Manufacturer #WP308685

Gas dryer sensor for igniter and flame. The sensor is located across from the gas igniter at the dryer’s burner assembly. This flame sensor should be closed for continuity at room temperature. Check for continuity with a multi-meter before replacing.

OEM Part - Manufacturer #WP338906

Shaft for dryer drum support roller. Rear shaft with right hand threads. Part is updated so nuts may need to be replaced as well on older dryers.

OEM Part - Manufacturer #WPW10359272

Adjustable leveling leg for washing machine. This leveling leg has a rubber foot. If the leveling leg is not adjusted properly, the washer will be off-balance and will vibrate or shake during operation.

OEM Part - Manufacturer #WPW10001130

Spring for idler pulley arm in dryer

OEM Part - Manufacturer #WPW10446781

Dryer front panel retainer clip. 1 clip per pack.

OEM Part - Manufacturer #W10854425

Snubber friction pads at the tri-base

OEM Part - Manufacturer #285744

Drive motor for direct drive washing machines &Washer/Dryer Combo's

OEM Part - Manufacturer #WP661600

Drive block under inner tub

OEM Part - Manufacturer #WP389140

Hose clamp

OEM Part - Manufacturer #WP596669

Screw, 10-24 3/8

OEM Part - Manufacturer #WP90767