Whirlpool 7GS6SHEXPL01 Refrigerator Replacement Parts

Door closing cam

We recommend replacing both the upper and lower cam at the same time.

Refrigerator or freezer lower door closing cam. A new screw is needed to mount the cam. Consider lubricating the cam during installation.

A new screw is needed to mount the cam.

2 Terminal door switch

EveryDrop Ice & Water Refrigerator Filter 5 reduces 16 contaminants, including lead and mercury, asbestos, and industrial chemicals. Each filter provides 240 gallons of filtered water and should be changed every 6 months to ensure proper contaminant removal and flow rate. NSF certified.

Replace filter every 6 months or 240 gallons to maximize contaminant reduction

Refrigerator drawer slide rail. The slide attaches to the side wall or shelf of refrigerator and can be used for either the right or left side.

This Whirlpool icemaker is a genuine replacement part for a malfunctioning icemaker in a Whirlpool refrigerator, ensuring compatibility and providing icy cool drinks.

If your old water line has a kink or starts to leak, it should be replaced. If your refrigerator does not already have a water filter, one can also be added inline with the copper supply line to improve the quality of your ice.

White Touch Up Paint

Refrigerator water inlet valve. Some models use a separate customer connection fitting, if that is needed see related item 2119001.

New customer connection fitting

Self-tapping screw.

Refrigerator water filter housing. Has 5/16 inch & ¼ inch quick connections built into it. Push down on rings at tubing to release.

Refrigerator defrost thermostat. The thermostat clips onto the evaporator. If the refrigerator does not defrost both the thermostat and heater can be tested to determine which part is at fault.

Use standard wire connectors to wire in new defrost thermostat.

Compressor run capacitor

Bottom coupling for in door ice dispenser bucket