- 1-844-200-5436
- My Orders
- Cart 0 item(s)
Refine Selection Here:
Item # 2438
Dryer heating element. If your dryer does not heat first check for a blown thermal fuse on the blower housing before replacing the heating element. In most cases the heating element will have a break in the element if defective. *May need wire connector to install heating element.
OEM Part - Manufacturer #279838
Item # 2977737
Dishwasher heating element kit. If the dishwasher isn't drying the dishes properly, the heating element may have burned out.
OEM Part - Manufacturer #W10518394
Item # 4161369
Bake element assembly with support brackets
OEM Part - Manufacturer #W10779716
Item # 525502
Dryer heating element assembly. If the dryer does not heat the thermal fuse should be checked before replacing the heating element. Normally, the element will have a break in the coil if defective.
OEM Part - Manufacturer #WP3387747
Item # 1180054
Dryer heating element. If the dryer no longer heats then the heating element may have failed, but it is not the most common cause. The most common cause for a dryer to stop heating is a blown thermal fuse.
OEM Part - Manufacturer #WP8544771
Item # 1544401
Oven bake heating element for lower oven. The terminals are male quarter inch spade connectors. The wires push onto the heating elements connectors. If the oven does not bake then the element could have burned out.
OEM Part - Manufacturer #WP7406P428-60
Item # 1719751
Oven bake element. If the oven won't heat, the bake element may have burned out. Often, if the bake element has burned out, it will be visibly damaged. Inspect the bake element for holes or blisters.
OEM Part - Manufacturer #WPW10308477
Item # 3289
8-inch diameter plug-in surface heating element with looped terminal ends. 5 turn. 2600 Watt. If your surface element won't heat, either the surface element or the surface element switch may be defective. To determine if the surface element is defective, use a multimeter to test it for continuity.
OEM Part - Manufacturer #WP660533
Item # 1184162
Oven bake element with push-on terminal ends. It is not unusual for a bake element to short out and arc in one spot. If this occurs, disconnect the power to the stove until the element has been replaced.
OEM Part - Manufacturer #WP74010750
Item # 3420
Oven bake element. Electric ovens use 240 volts to operate the heating elements. If the oven does not bake check if there is a burned out section of the element.
OEM Part - Manufacturer #WP308180
Item # 3319
6-inch diameter plug-in surface heating element with looped terminal ends. 4 turn. 1500 Watt. If your surface element won't heat, either the surface element or the surface element switch may be defective. To determine if the surface element is defective, use a multimeter to test it for continuity.
OEM Part - Manufacturer #WP660532
Item # 948279
Oven bake heating element with push on wire terminals. It is not unusual for a heating element to short in one spot and arc. If this occurs, shut off the power to the range until the element has been replaced.
OEM Part - Manufacturer #WP77001094
