Kenmore Heating Element Parts

Dryer heating element assembly. If the dryer does not heat the thermal fuse should be checked before replacing the heating element. Normally, the element will have a break in the coil if defective.

Dishwasher heating element kit. If the dishwasher isn't drying the dishes properly, the heating element may have burned out

Oven bake element. If the oven won't heat, the bake element may have burned out. Often, if the bake element has burned out, it will be visibly damaged. Inspect the bake element for holes or blisters.

Dryer heating element. If the dryer no longer heats then the heating element may have failed, but it is not the most common cause. The most common cause for a dryer to stop heating is a blown thermal fuse.

Heating Element

Oven bake heating element for lower oven. The terminals are male quarter inch spade connectors. The wires push onto the heating elements connectors. If the oven does not bake then the element could have burned out.

Oven bake element with push-on terminal ends. It is not unusual for a bake element to short out and arc in one spot. If this occurs, disconnect the power to the stove until the element has been replaced.

The Whirlpool Bake Element is a high quality part located at the bottom of the oven that supplies heat for baking. It is 16-5/8 inches wide X 15-3/4 inches deep and is for electric ovens on ranges with a rating of 2600Watt and 240Volt. It replaces multiple part numbers. Use caution when servicing.

Surface coil element replacement kit, 2 eight inch elements, 2 six inch elements, four receptacles and related hardware. If the terminal blocks and surface elements on your stove top are in bad shape this is the perfect kit to refresh the appliance.

Oven bake element. It is not unusual for a heating element to short in one spot and arc. When this occurs the power should be shut off to oven and the not restored until after the element is replaced.

Heating Element for dryer Whirlpool/Kenmore part #WP4391960

If the terminal that connects to the element was damaged a new terminal can be spliced into the exsisting wiring harness.

The Whirlpool Bake Element is a high quality part located at the bottom of the oven that supplies heat for baking. It measures 15-5/8 inches Length by 15 inches Width and is for electric ovens with a rating of 2100 Watt and 240 Volt. It replaces multiple part numbers.

Dual radiant surface element 3000/1400 watt