Whirlpool Hose, Tube & Fitting Parts

Dishwasher drain hose loop with check valve. Goes from pump to drain; 67 inches

Six feet

Drain hose extension. Goes from the drain hose loop to the house drain. 6-1/2 feet.

Drain hose-external, 12ft

Water Inlet Assembly

Drain hose with elbow bracket. Length 56 inches. Grey 90 coupler end ID is 1 inch

Drain hose, pump to back panel

Internal Drain Hose. Goes from the drain pump outlet to the rear panel

Refrigerator drain tube assembly. *Replaces old style nozzle and trough system. During the refrigerator's defrost cycle, the defrost water flows through the defrost drain into the drain tube. If the defrost drain is frozen, the defrost water will overflow the drain trough and leak into the freezer.

Remove existing drain trough funnel, (if applicable) and duck bill grommet from the drain outlet and discard. IMPORTANT: Be sure to remove any ice blockage/obstructions in the freezer behind the Evaporator cover and drain tube.

Drain pump outlet hose

Package of two 5-foot-long Industrial Braid hoses with pre-installed washers and straight ends. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.

Middle & upper wash water supply tube assembly

Dishwasher water inlet fitting. Has standard 3/4 inch hose thread on one end and 3/8 inch copper tubing on the other. Copper tubing fitting is compression. Includes rubber washer for hose fitting end.